Patterned Dog Collar – Printed Nylon Quick-Release Collar, 6 Fun Designs
Patterned Dog Collar – Printed Nylon Quick-Release Collar, 6 Fun Designs
Patterned Dog Collar – Printed Nylon Quick-Release Collar, 6 Fun Designs
Pixel Hearts / XS
Couldn't load pickup availability
Make it a Walk Kit
Add the matching harness & lead
Size guide
Size guide
| Size | Neck | Width |
|---|---|---|
| XS | 21–33 cm8.3–13.0 in | 1.5 cm0.6 in |
| S | 26–42 cm10.2–16.5 in | 2.0 cm0.8 in |
| M | 32–50 cm12.6–19.7 in | 2.5 cm1.0 in |
| L | 36–61 cm14.2–24.0 in | 2.5 cm1.0 in |
Measurements are taken by hand and can vary by 1–2 cm.
How to measure
- Neck: around the neck where a collar normally sits.
- Weight: weigh yourself holding your dog, then subtract your own weight.
- Use a soft tape measure. Two fingers should slide flat under every strap once fitted.
- Between sizes, or a deep chest or thick coat? Choose the bigger size.
Description
Add some personality to every walk. This patterned dog collar is printed on both sides of tough nylon webbing, with a silver-tone quick-release buckle and a stitched zinc alloy D-ring for lead and ID tag.
- Nylon webbing printed on both sides
- Silver-tone side-release buckle
- Zinc alloy D-ring for a lead or ID tag
- Silver-tone slide for adjusting the length
- Available in six patterns and sizes from XS to L
Matches our printed harness and lead, for puppies through to medium and large dogs.
Product details
- Material: nylon webbing, printed on both sides
- Second coordinating pattern on the inside face
- Fastening: silver-tone side-release buckle that clicks shut and opens with a squeeze
- Zinc alloy D-ring for a lead or ID tag, stitched in place
- Silver-tone slide for adjusting the length; it grips the webbing so the fit holds
- Patterns: Pixel Hearts, Red Hibiscus, Pink Tropical, Pink Alien, Rainbow Pride, Vintage Car
- Sizes: XS (1.5cm wide), S (2.0cm), M and L (2.5cm)
- Weight: approx. 30g
- No padding, no reflective trim, no personalisation
Care
- Hand wash in cool water with mild soap
- Air dry away from direct heat; do not tumble dry
- Do not bleach or iron, as heat can fade the print
- Dry the metal fittings after wet walks
- Check the buckle, D-ring and stitching regularly and replace the collar if the webbing frays or the buckle stops clicking firmly
FAQs
What is included?
One printed dog collar in the pattern and size you choose. Leads, ID tags and name plates are not included.
Is the pattern on both sides?
Yes. The design is printed on both faces of the webbing, with a second coordinating pattern on the inside.
How do I pick a size?
Measure your dog's neck where the collar will sit and choose a size whose range runs at least 2cm above that measurement. Two fingers should slide flat underneath once fastened.
What is the difference between M and L?
Both are 2.5cm wide. L simply adjusts to a larger neck size.
Is it suitable for a dog that pulls?
It is not padded, so for dogs that pull hard a padded collar or a harness spreads the pressure better.
How strong is it?
No breaking strength has been published for this collar. Check the buckle, D-ring and stitching regularly.
Will the print fade in the wash?
Hand wash in cool water and air dry. Heat from tumble drying or ironing can fade the print.
Can my dog wear it unattended?
Remove the collar when your dog is unattended in a crate.
Delivery & returns
Every order ships to UK addresses with a tracking number. You'll get a dispatch email as soon as it's on its way.
Changed your mind? Return unused items in their original condition within 30 days of delivery.
Full details: Shipping policy and Refund policy.
